The roller granulator
is produced by non drying process at room temperature, with one-time molding and output of 1-4 T / h, with four specifications.
The roller granulator has the advantages of less investment, quick income and good economic benefit. The complete set of equipment is compact in layout, scientific and reasonable, and advanced in technology. Energy saving and consumption reduction, no three wastes discharge, stable operation, reliable operation and convenient maintenance. The fertilizer granulator machine
has wide adaptability to raw materials, and is suitable for granulation of various raw materials such as compound fertilizer, medicine, chemical industry, feed and so on, with high granulation rate. It can produce various concentrations and types of compound fertilizers (including organic fertilizer, inorganic fertilizer, biological fertilizer, magnetic fertilizer, etc.). In particular, rare earth, potassium fertilizer, ammonium bicarbonate series compound fertilizer granulation.
Instructions for roller granulator:
- 1. The granulator machine for fertilizer should be started without load, and it is strictly forbidden to start with material.
- 2. It is strictly forbidden to enter the material with dirt in order to avoid breaking the roller shaft.
- 3. The gear of the fertilizer granulator machine should be smeared with yellow dry oil before starting up.
- 4. Apply yellow oil to the chain and sprocket every 7 days.
- 5. The bearing pedestal shall be filled or replaced with new yellow oil every three months.
- 6. The gear oil can be used only after adding gear oil once before use. The gear oil should be changed every four months.