In organic fertilizer production, the fertilizer screener machine plays a vital role. Below is a detailed guide on how to use it.  

Installation and Adjustment

1. Location: Place the screener machine on a flat, solid surface to avoid shaking during operation. Ensure the area is well-ventilated and keep it away from water sources to prevent rust.  

2. Adjustment: After installation, check that all parts (such as screens, vibration motors) are securely connected. Run a no-load test to observe if the vibration is normal and in the correct direction. Adjust the motor’s eccentric blocks if needed.  

Operating Steps  

1. Feeding: Slowly and evenly add raw organic fertilizer into the machine’s inlet. Avoid feeding too quickly, as this can clog the screen or reduce efficiency. Adjust the feeding speed based on the machine’s model and capacity.  

2. Operation: Monitor the fertilizer screener machine during use. Listen for unusual noises and check for screen damage or material buildup. If the screen clogs, reduce feeding speed and use a tool to gently clean the material on the screen.  

3. Discharge: Screened fertilizer exits through separate outlets-qualified material from the main outlet, and larger particles from another. Keep outlets clear to avoid blockages.  

Shutdown Process  

1. Stop Feeding: Before shutting down, stop feeding and let the machine finish processing remaining material.  

2. Cleanup: Turn off the motor after screening completes. Clean the fertilizer screener machine to remove residue and impurities.

3. Maintenance: Inspect parts for wear and replace damaged components. Lubricate gears, bearings, and other moving parts regularly.