1.The produced particles are cylindrical.
2.Organic content can be as high as 100%, which achieves the goal of pure organic granulation.
3.No adhesive is needed during granulation due to the principle that the organic particles can be mosaic with each other to grow bigger in a certain force.
4.The particles are strong, it can be immediately screened after granulation, which can reduce the drying rate and energy consumption.
5.The organic matter does not need to be dried after fermentation , and the moisture content of raw materials can be 20-40%.
6.The pressure wheel is adopted, and the speed of the two ends is consistent with the die plate and the outer ring line, and there is no dislocation friction between the wheel and the die. The resistance is reduced, the kinetic energy loss is reduced, the service life of the die is prolonged, and the production cost is reduced.
7.The pressure rollers are uniformly and closely set, smooth operation, while we also increasing the suppression area, so that improve production efficiency.
8. The screw center adjusting pressure structure is adopted, the clearance of the die can be big or small, so that different materials can be applied to granulation and ensure the pressing effect.
9. The aperture of variety mould of the flat die extrusion granulator are range from Φ1.5mm to Φ20mm to adapt to different materials granulation, and finally achieve the best benefits.